Baca Juga
According to wikipedia, knitting is a method of making cloth, clothing or clothing from yarn knitting supplies. Different from the ranks of weaving yarns that cross two mutually perpendicular, knitting just use a piece of string. A row of punctures which was held in one of the finished knitting needles to puncture the start of a new one.
Knitting can be done by hand or by machine. There are many different types of styles and techniques of knitting. Basic techniques in knitting is a puncture above and below the puncture. Prick top is crochet thread from the front, while the bottom is hinging yarn stab from behind. Knitwear has a pattern like the letter v is continuous.
Flat knitting is done using two knitting needles or circular needles. The result is a fabric straight and flat (rectangular). Circular knitting is done using two knitting needles or circular needles tipped. The result is a cylinder shaped fabric like socks and a sweater sleeve. A wide range of knitwear including: jackets, Marshall, hats, make bracelets, and many others.
Well after we know what it is knitting or knitting, now let's learn how to knit techniques. This technique is not for the machine but by hand.
Kind of - kind Puncture Basic
1. Early knot
How to knit initial node:
a. Draped beng in the needle, and then put the rest in the middle of the circle benag.
b. Insert the needle under the thread in the middle of the circle.
c. Pull the thread length (not the end of the thread)
2. Plugs Chain
How to knit with chain stitch technique:
a. Make initial knot, then tie the thread on the needle
b. Pull the thread that linked up out of the eye of a needle
c. Perform ab stages according to the number of chains required.
3. Single puncture (sc)
How to knit with a single puncture technique:
a. Create a basic chain stitch
b. Masukka needle on the second hole of the needle counted mundir
c. Attach the needle to thread
d. Pull the thread up through the hole in step b
e. Attach the needle to thread
f. 2 Pull the thread up through the hole in the needle
g. Do the bf according to the pattern instructions (see g1 and g2)
4. Half double puncture (hdc)
How to knit with double puncture technique half:
a. Attach the yarn on the needle, prick the starting ch 3
b. Pull the needle so that there are 3 lp.
c. Attach the yarn on the needle, then pull straight through 3 lp.
d. Start a new jab again
5. Double puncture (dc)
How to knit with double puncture technique:
a. Create a basic chain stitch
b. Attach the yarn on the needle
c. Insert the needle at the third chain counted backward from the needle
d. Attach the yarn on the needle
e. Pull the thread through the hole rantia (step c)
f. Attach the yarn on the needle
g. Pull the thread through the two holes
i. Benag pull through 2 holes
j. Perform steps a-g as directed pattern
6. Triple jab (tr)
Puncture is similar to a double puncture. On double skewers, thread 1 times in needles associated. whereas the triple skewer, thread linked 2 times.
How to knit with triple puncture technique:
a. Create a basic chain stitch
b. Relate thread 2 times, stick to the four chains
c. Relate thread 1 times, then remove it from punctures chain
d. Attach the yarn, thread and remove the 2 holes in the needle melali
e. Repeat steps d
f. Attach the thread, then remove benag of 2 pinhole. If you will move to the second row, starting with making chain stitch 4 times.
7. Plugs insert (sl st)
Typically, insert skewer used to connect and create a new stab at another temapt
How to knit with puncture technique parenthesis:
a. Insert the needle in the next stitch
b. Attach the needle on beang
c. Pull the thread through the needle hole and chain on
Thus the explanation about knitting and knitting a few techniques. Be sure to read other articles on Crafts ya. Hopefully useful and good luck!